{"id":537,"date":"2017-12-11T20:36:07","date_gmt":"2017-12-11T20:36:07","guid":{"rendered":"http:\/\/1lumen.com\/?page_id=537"},"modified":"2024-03-19T20:21:37","modified_gmt":"2024-03-19T19:21:37","slug":"lumintop-blf-gt","status":"publish","type":"post","link":"https:\/\/1lumen.com\/review\/lumintop-blf-gt\/","title":{"rendered":"Lumintop BLF GT"},"content":{"rendered":"\n

BLF GT review<\/h2>\n\n\n\n
<\/div>\n\n\n\n

Table of contents<\/h3>\n\n\n\n
    \n
  1. Intro<\/b><\/a><\/li>\n\n\n\n
  2. Beamshots<\/b><\/a><\/li>\n\n\n\n
  3. Conclusion<\/b><\/a><\/li>\n\n\n\n
  4. Where to buy<\/b><\/a><\/li>\n<\/ol>\n\n\n\n
    <\/div>\n\n\n\n

    Introduction BLF-GT<\/h2>\n\n\n\n
    <\/div>\n\n\n\n

    The Lumintop BLF GT is a next-generation super thrower, commonly called the GigaThrower. It was developed by members of BudgetLightForum, in collaboration with the renowned flashlight manufacturer, Lumintop. The project started in 2016, and updates were slowly rolled out the following year.<\/p>\n\n\n\n

    In December 2017, the 2nd iteration of the light was developed and approved by the BLF team to start mass production. It was good to receiving honors as the farthest-throwing LED light<\/a> of the year!
    <\/p>\n\n\n\n

    The pictures probably don’t do justice to its actual size. Seeing this light in person is what makes it so exceptional…. Let’s take a look at what this throw monster has to offer. <\/p>\n\n\n\n

    <\/div>\n\n\n\n

    Lumintop BLF GT specifications<\/h3>\n\n\n\n
    Brand\/model<\/th>Lumintop BLF GT<\/th><\/tr><\/thead>
    LED<\/td>Cree XHP35 Hi <\/td><\/tr>
    Lumens<\/td>2,000 lm<\/td><\/tr>
    Beam intensity<\/td>1,00,000 cd<\/td><\/tr>
    Battery config.<\/td>4\/8*18650<\/td><\/tr>
    Material<\/td>Aluminum<\/td><\/tr>
    Modes<\/td>Multi (NarsilM)<\/td><\/tr>
    Blinkies<\/td>Multi (NarsilM)<\/td><\/tr>
    Reflector<\/td>Smooth<\/td><\/tr>
    Waterproof<\/td>IP65<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    \n
    \"\"<\/figure>\n\n\n\n
    \"FLashlight<\/figure>\n<\/figure>\n\n\n\n
    <\/div>\n\n\n\n

    Handling of the light<\/h2>\n\n\n\n
    <\/div>\n\n\n\n

    Holding the BLF GT, you first notice that it definitely isn’t one of the easiest lights to handle one-handed. If you have small hands, this light might not be suitable for one-handed operation. <\/p>\n\n\n\n

    I imagine that for most buyers, the GT won\u2019t be used too much for practical work, since it’s not a Tactical Flashlight<\/a> nor an EDC light. It’s quite fun playing around with it, but finding its uses is difficult for us enthusiasts. If you are only using 4x 18650s (it works on 4 and 8 cells) you should put the carrier with the batteries towards the backside of the light. This helps with balancing. Otherwise, the center of gravity is towards the head, and becomes front-heavy. <\/p>\n\n\n\n

    Lining up!<\/strong> Unfortunately, I noticed that the holes for attaching a carry strap are not lined up straight, nor are the flat parts on the body matching the side switch. If you attach the strap, the button is actually on the bottom of the flashlight, not on the top. See the pictures below. The tailcap has the other attachment point, which can be moved around. It can be seen as loose, but it\u2019s actually a neat feature for moving the tailcap around. The tube is quite thick, but this is to be expected for an 8*18650 battery tube that has to include multiple carriers. <\/p>\n\n\n\n

    The body diameter is also a little on the wide side, but this is to be expected for a 4*18650 battery tube, including a battery carrier!<\/p>\n\n\n\n

    Tripod hole<\/strong><\/p>\n\n\n\n

    I also do photography work, and I own a Manfrotto tripod with a 029 head. Surprisingly, the head takes the Manfrotto hexagonal quick-release plate. And guess what? The thread doesn’t fit correctly. Looking at the pictures linked above, you can see the ring they put in the tripod hole, but the head is too close to the hole to attach to the quick-release plate. Of course, you can add an adapter, but not everybody owns one.<\/p>\n\n\n\n

    <\/div>\n\n\n\n

    Flashlight Knurling<\/h2>\n\n\n\n
    <\/div>\n\n\n\n

    The GT body possesses quality knurling without any sharp edges. That being said, it is slippery. Take a look at the picture to see the knurling up close. <\/a><\/p>\n\n\n\n

    The anodizing has been well applied, but I am not completely satisfied with it. This kind of glossy anodizing tends to accumulate fingerprints and dirt, which I do not like. As seen in the picture, the printing is done well. There is nothing to complain about here, but it isn’t very exclusive either.
    Threads came completely dry. This can be a con for some people. For me, this isn’t really a problem, as it allows me to clean the threads and put new lubricant on them. The O-ring is lubed. The threads are a bit loose side when screwing onto the head.     <\/a><\/p>\n\n\n\n

    \n
    \"knurling<\/figure>\n\n\n\n
    \"print<\/figure>\n<\/figure>\n\n\n\n
    <\/div>\n\n\n\n

    LED, Lens, bezel and reflector<\/h2>\n\n\n\n
    <\/div>\n\n\n\n

    The reflector is made of plated aluminum and is smooth\u2014but not smooth as butter! At least mine has some noticeable machining rings.<\/p>\n\n\n\n