Nitecore TUP pocket light review (1,000 lumens)
If you are looking for a lightweight belt light, have a look at the Nitecore TUP. It can deliver 1000 ANSI Lumens and includes a display that shows Voltage, remaining runtime and Output. And the output numbers are pretty consistant with my measurements. I haven't tested the runtime yet, and I'm curious how this will reflect real life usage after the battery had a few dozen of cycles.
It has a large pocket clip that should hold up pretty well over the long run.
What you'll get:
- Nice carton box
- Nitecore TUP flashlight
- Key clasp
- Manual + warranty paper
Handling of the light and knurling
This is not your average kind of light. The TUP is very small and light weight. I am thinking about how to use it, and how to carry it. The pocket clip seems to be of decent quality. At the rear end of the TUP is a small metal ring to attach the key clasp. This is supposed to withstand up to 30kg/ 66lbs of weight.
The ease of use, and the ability to attach it to your keys make it a great rechargeable flashlight. And therefore it was added to the list!
- hehehe.. nope
For about $50-$60 you can get a very handy little pocket rocket or belt-rocket. Since the light is made of plastic It can damaged rather easy. The Display is a great and useful feature, but also prone to failure imho. I once reviewed the Imalent SA04 which had a touch display, but it soon broke on me. Although this doesn't have a touch display, it still feels like it can easily break. Therefore I would not recommend this for on your keychain. Soon it will start showing damage.
Well... since it's made of plastic, I can't say much about anodization.
Nope.. It doesn't have threads.. It might have some O-rings, but I can't see them.
LEDs, Lens, Bezel and Reflector
Behind the TIR optic you can find a XP-L HD V6 with a max output of 1000 Lumens. And during my test this number is very realistic, unlike many others.
Since the TUP uses a TIR optic, it doesn't have a reflector, and it doesn't have a bezel either, making the body of the TUP a little vulnerable.
That being said, I'm a bit disappointed that mine doesn't have the LED centered very well, almost to the point that the optic is touching the dome of the LED. This is definitely a minus point.
The Nitecore TUP is not your regular flashlight.
- Length : 67mm / 2.7"
- Width body : 26 mm / 1"
- Width widest part : 25 mm / 1"
- Weight: 54 gr / 1.91 oz.
From left to right: Malkoff MDC Bodyguard, Panasonic 18650 battery, Nitecore TUP, Eneloop AA and Efest 18350 battery. And below that, you can see the Sunwayman V11R Ti+ (18350) , Nitecore TUP and Reylight BLF Titanium (18350).
The Nitecore TUP has 2 User Interfaces.. Well actually 3!
- Demo mode
- Daily mode
- Lockout mode 1
By default it arrives in Demo mode. Demo mode and Daily mode work the same with only 1 exception.
Demo mode uses a 30 second timer on all modes, except TURBO, which is only available when you press and hold the button.
Switching between Demo mode and Daily mode: Press and hold both buttons. The TUP will flash twice and in your screen you can see in what mode it currently is.
Modes: 4 + Turbo
1lm, 15lm, 65lm, 200lm and Turbo 1000Lumens
From OFF: Mode button
- 1 click: Display On
(so you can see in what mode it's currently in without turning on the flashlight. This is a great feature.
- Press and hold: Turbo
From OFF: Power button
- 1 click: On : last used mode
- 1 click + press and hold 1 sec: Lockout mode 1
- 1 click + press and hold 3 sec: Lockout mode 2 (unlock with same action)
- Press and hold: 1lm (firefly)
From ON: Mode button
- 1click: cycle modes from low to high
- Press and hold: Turbo
From ON: Power button
- 1click: Off
- Press and hold 1 sec: Lockout mode 1 (half lockout mode)
- Press and hold 3 sec: Lockout mode 2 (full lockout mode)
The TUP has 2 lockout modes. I just told it has 3 modes, since you can still use Turbo mode in Lockout 1! And you can still see how much battery is left.
Lockout 2 doesn't let you do anything. It also won't allow you to see the remaining battery charge.
How to enter lockout mode?
From off: click 1 time + click and hold for several seconds. You can see a lock icon with a number 1 or a number 2, which indicate the lockout mode you just entered.
To deactivate lockout mode?
Click 1 time + press and hold for several seconds. You'll see a key icon and a progress bar.
Low Voltage Warning:
When the battery reaches a voltage of 3.4 Volts, the power indicating LEDs will flash every 2 seconds to indicate a low battery. To my understanding 3.4 Volts is actually still pretty high, and don't know why they cut it off at 3.4 Volts.. But that might be an overly protective measurement.
Batteries and charging:
The Nitecore TUP has a built-in rechargeable lithium battery that has a capacity of 1200mAh. It can be charged using a standard Micro USB charge cable. The package doesn't include a charge cable, so if you have no charge cable yet, make sure you'll get one before the battery runs out of juice.
Another important thing to note is that the USB port cover is very hard to remove without proper nails. So if you have short nails, you probably need a little tool to pry off the rubber cover!
Continous Power Mode: Use while connected to USB power source
The TUP can be powered continuously from a power source via the USB. So you can use a power bank to run the light! This is definitely a cool feature!
Lumens were measured with the Hagner EX4 Lux Meter and "calibrated" with a Convoy S2+ at 136 lumens.
|MFG Lumens||Measured Lumens|
|Nitecore TUP||1lm||1.55 Lumens|
It performed above expectations! Even Turbo was measured higher than the manufacturer claimed. That is rather unique. It's usually the other way around.
There is no way to measure Amps.. since the battery is built in, and it's not easy to take apart.
Total runtime in High mode was a total of 3 hours.
Low Voltage Warning
When the battery voltage goes low, the 2 indicator lights behind the Mode and Power switch will start blinking. This time I stopped the runtime and the display showed 2.63Volts. Even when turned off, the 2 blue indicator LEDs kept blinking.
This was measured using the Turbo mode:
- Total throw measured at 5 meters: 11150 cd / 211 meters / 0.131 miles
- Total throw measured at 10 meters: 11300 cd / 213 meters / 0.132 miles
The 1000 Lumens mode can only be used when pressing the electronic switch! Still a very cool feature!
Where to buy: Nitecore TUP
Nitecore Tup at Banggood